Recently purchased Evo-all kit with THAR-TOY6 for my 2014 lexus is250 (push to start) and tried to install it.
I believe that installation and programming were done properly as per instructions.
1. Connected the black pin to steering column and the B white pin to ECU according to instructions
2. Data pin inserted to evo-all kit with pressing programming button
3. The button was released when solid blue is on
4. All other pins connected
5. Ignition on and the blue light blinking
6. Turn ignition off
But still it does not start with 3x lock button on OEM fob.
1. the blue light is not on with fob lock button pressed (I saw others on Youtue light up blue with button pressed)
2. the kit has the solid yellow light when the car is running or ignition is on
I did not buy the flash updater because a retailer said it is not necessary if I would like to use only remote start feature.
Do I have to hook up extra wires from the white 20 pin to any other pin/wires? instruction tells each wire's feature (ex: (-) ground while running - dark blue - A8), but it does not tell what to do with those wires or I do not understand properly.
Please advise.
S/N on the kit: 001A07 147926
Vehicle: 2014 lexus is250 pts automatic
Thank you,
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
